空调移机怎么回收氟利昂？

How to recycle Freon when the air conditioner is moved?

A、将空调调制到制冷状态下：首先使用扳手将室外机两个连接管阀门的盖子给打开，然后需要使用5个的六角扳手，将其放到细的（高压阀）阀口，然后再阀门迅速的关上，大概20秒过去之后再将粗的阀门（低压）关上，然后才是关闭空调电源，断掉电源。这样做完之后就将氟收到外机中去了。这样就能够进行拆机工作了。

A. Modulate the air conditioning to refrigeration state: first, open the lid of the two connecting pipe valves of the outdoor machine with a wrench, and then use five hexagonal wrenches to place it at the fine (high-pressure) valve opening. Then the valve closes quickly. After about 20 seconds, turn off the thick (low-pressure) valve, and then turn off the air conditioning power supply. After doing this, fluorine is received into the external machine. In this way, the machine can be disassembled.

B、安装的时候还有开阀门排空定送水 保定骨伤骨病 铜鼎铜钟 淤泥固化设备 保定舞蹈 化粪池钢模具 保定网站建设：具体如下：把内外机固定好之后，把空调连接好，主要是把内外机连接管都紧好，注意一定接好，以防制冷剂泄露。

B. When installing, there are also valves to empty: Specifically as follows: after fixing the internal and external machine, connect the air conditioner well, mainly tighten the connecting pipe of the internal and external machine, pay attention to certain connection, in order to prevent the leakage of refrigerant.

C．开关打到自动档空调就正常工作，用内六角打开高压阀门（细管阀门），再用六角顶住加氟口顶针（加氟口在低压上），使里面的气体跑出来，10秒钟左右就可以了，不要时间太长，以免雪种跑的太多。这样就可以使管路里面的空气放出来。