空调拆室外机应由专业制冷维修工在保证安全的情况下拆卸。拧开外机连接锁母后，应用住备好的密封钠子旋好护往外机连接接头的丝纹。再用扳手松开外机底脚的固定螺丝。拆卸后放下室外机时，最好用绳索吊住，卸放的同时应注意平衡，避免振动、磕碰，并注意安全。应慢慢捋直室外空调器的接管，用准备好的四个堵头封住连接管的四个端口，防止空气中灰尘和水份进入。堵头上好，最后再用塑料袋扎好，盘好以便于搬运。
The outdoor unit of air conditioner shall be disassembled by professional refrigeration maintenance workers under the condition of ensuring safety. After unscrewing the connecting lock mother of the external machine, the prepared sealing sodium shall be used to protect the wire pattern of the connecting joint to the external machine. Use a wrench to loosen the fixing screw of the external machine foot. When the outdoor unit is put down after disassembly, it is better to hang it with ropes. During the removal, pay attention to balance, avoid vibration, bump and pay attention to safety. The connecting pipe of the outdoor air conditioner shall be straightened slowly, and the four ports of the connecting pipe shall be sealed with the prepared four plugs to prevent the dust and water in the air from entering. Plug well, and finally use plastic bags to tie well, plate well for easy handlin